Featured Products
Smart Control Panel & Beacon Combo
(€491.94 inc VAT)
Treatment Tank Control Panel (Smart Range)
This New Style Klargester Control Panel for waste water tanks with digital display continuously monitors the internal timetables and operates the appropriate pump/motor outputs according to a timetable entry. The status is shown on the display. The current time continues to be updated internally by battery backup when the mains fail, and the control...
€482.89 €399.95 ex VAT (€491.94 inc VAT)
EBARA BEST FOUR M SUMP PUMP
(€923.21 inc VAT)
EBARA BEST FOUR M SUMP PUMP
The Ebara Best Four Manual Submersible pump can be used for various domestic applications including draining wells, garages, cellars or places that are subject to flooding.
It can also be used for movement of seepage water or draining of unfoul wastewater as well as irrigation of gardens.
Technical Details
Equipped with mechanical seal as per standard
Corrosion...
€750.58 ex VAT (€923.21 inc VAT)
ET-60 AO Charles Austen Blower
(€164.23 inc VAT)
ET60 AO Charles Austen Blower
The Charles Austen ET60 A is a linear diaphragm air pump with alarm which provides a clean oil free air source.
This 60 litres per minute capacity is suitable for a wide range of applications including
• Septic tank and Sewage Treatment Plant (STP) aeration
• Aquatic oxygenation for fish ponds and aquariums
• Spas / whirlpools
• Water features
...
€133.52 ex VAT (€164.23 inc VAT)
Grid
List
Charles Austen Envirosure Beacon
Charles Austen Envirosure Beacon
Perfect for helping detect if a blower in a sewage system is failing.
Can be bought to run along side the charles austen low pressure alarm
P18 - P25 COVER & ACCESS COVER
P18 - P25 COVER & ACCESS COVER
Biotec P18-P25 Complete cover, including the inner Surfboard style lid, Locks & Keys and Anti-Slip Mats
Made from High grade Glass Reinforced Plastic (GRP)
Green Powder coated protective layer
Seal not required
If a strong effluent smell is coming from the tank, the tank needs to be inspected
P18-P25 Klargester Biotec Sewage Treatment Plant Outer Cover
Klargester BioTec Sewage Treatment Plant Outer Cover P18-P25
Biotec P18-P25 Complete cover, including the inner Surfboard style lid, Locks & Keys and Anti-Slip Mats
Made from High grade Glass Reinforced Plastic (GRP)
Green Powder coated protective layer
Seal not required
*Access cover, sold separately
Dims: 2755mm diameter
If a strong effluent smell is coming from the...
3 PHASE TWIN CONTROL PANEL
3 PHASE TWIN CONTROL PANEL
Kingspan / Klargester 3 Phase Twin Control Panel gives the customer security in knowing when something is wrong and that this 415 volt twin control panel will trigger when there is a high water level and pump failure indicated with a red light on the front of the control panel.
This Control Panel is recommended to be housed within a waterproof encloser/Kiosk. These...
BC Biodisc Belt, Pre 2006 Models Only (1800mm)
BC Biodisc Belt (1800mm)
Replacement heavy-duty drive belt to suit Klargester BC BioDiscs manufactured pre-2006.
140no Teeth
8mm Pitch
20mm Wide Standard Duty HTD Belt
The motor on these Biodisc Units high up in the tank and offside from the rotor.
BC Pulley Locking Element
BC Pulley Locking Element
This locking element can be used both on the BC sewage treatment systems. It is used to clamp the bottom pulley onto the main shaft.
BIODISC BA/BB LID EXTENSION NECK 550mm
BA-BB- Invert 550mm extension neck
BA-BB- Invert 550mm extension neck - allows sewage treatment system to set at the correct level to achieve the recommended gradient for the external pipework
Materials:Glass Reinforced Plastic (GRP)
BIODISC BA/BB NYLON WASHERS
BA/BB BIODISC NYLON WASHERS
PRICE IS FOR SINGLE WASHER**
BA / BB BioDisc Nylon spacer washers used for the shaft.
We recommend to order x6 in total.
A delivery charge of €9.20 + vat will be added to the order at the checkout.
BIODISC GRAB HANDLE
BIODISC GRAB HANDLE
Black plastic Klargester Biodisc Handle to suit cover
1/2 BS CHAIN & LINK SET FOR BA OR BB BIODISC
1/2 BS Chain & Link Set for BA or BB Biodisc
1/2 BS Chain & Link Set - Biodisc replacement chain - Can be used on Biodisc Sewage Treatment Systems. This chain can be measured from centre to centre of each link.
Strong,
Simple,
Versitile,
Reliable
This chain comes as standard 5 foot in length
110MM BLANKING CAP
110MM BLANKING CAP
PVC Plastic Closing Cap To suit standard sewage piping
AIR FILTER FOR ET60 - ET80 BLOWER
AIR FILTER FOR ET60 - ET80 BLOWER
Air Filter to suit ET-60 and ET-80 Charles Austen Blower
B1-FA-Panasonic-Pinion-Wheel
B1-FA-Panasonic-Pinion-Wheel
Panasonic pinion wheel is suitable for Klargester B1 to BF treatment systems. Suited for panasonic gearboxes.
BA Rotor Assembly Complete
BA Rotor Assembly Complete
Full rotor pack for 1 x BA Biodisc
This product is made to order, lead time 2 to 3 weeks.
BA-BB-Biodisc-Lid-Extension-Neck-300mm
BA-BB-Biodisc-Lid-Extension-Neck-300mm
BA-BB- Invert 300mm extension neck - allows sewage treatment system to set at the correct level to achieve the recommended gradient for the external pipework
Materials:Glass Reinforced Plastic (GRP)
BC 1/2 Nylon Bearing
BC 1/2 Nylon Bearing
This is a Klargester half bearing to fit the non-drive end of a Klargester BioDisc BC Sewage Treatment System.
30mm wide
BC BioDisc Bearing Kit
BC BioDisc Bearing Kit
Klargester BC BioDisc Bearing kit for the drive end.
The BC drive end bearing for BioDisc is a complete nylon bearing with a grey bush insert & is suitable for all the Klargester BC BioDisc Sewage Treatment Systems (30mm).
BC Biodisc Belt (1120mm)
BC Biodisc Belt (1120mm)
Replacement heavy duty drive belt to suit Klargester BC BioDiscs
140no Teeth
8mm Pitch
30mm Wide Standard Duty HTD Belt
BC BioDisc Bottom Pulley
BC BioDisc Bottom Pulley
The Klargester BC bottom pulley fits onto the shaft of all BC Biodisc sewage treatment systems.
30mm wide
8mm pitch
65mm Plain Bored
80 Teeth
Torerance H9
Note, when changing these the locking elemenet needs removed first. It is advised that the locking emement is changed when changing the botttom pulley
BC BioDisc Whole Bearing (Drive End)
BC BioDisc Whole Bearing (Drive End)
Klargester BC BioDisc Whole Bearing for the drive end. A Klargester BC BioDisc nylon bearing for the Klargester BC BioDisc Sewage Treatment Systems (30mm) and comes with a grey insert.
BD Metal Top Retaining Plate for Front Bearing
BD Metal Top Retaining Plate for Front Bearing
Used on BD Biodisc
BD/BE BEARING BUSH HALF x 2no
BD/BE Bearing Bush Half x 2no
This is a bearing bush half for a 40mm Diameter shaft. Suitable for Klargester BD/BE Biodisc. We recommend this is ordered with part 0002820
Comes as a pair of 2no
BD/BE BEARING HOUSING
BD/BE BEARING HOUSING
The BD/BE Half Bearing is suitable for 40mm diameter shafts in all Klargester BD/BE BioDisc Sewage Treatment Systems.
This listing is for one single half bearing (Each Biodisc contains 2)
BD/BE Bottom Pulley for Biodisc
BD BioDisc Bottom Pulley
The BD BioDisc Bottom Pulley fits the main media shaft on all Klargester BD BioDisc Sewage Treatment Systems.
A BD BioDisc Locking Element is also available separately, to lock the sprocket onto the shaft.
BD/BE Locking Element for Biodisc
BD/BE Locking Element for Biodisc
The BD/BE Locking Element for Biodisc is suitable for all Klargester BD/BE BioDisc Sewage Treatment Systems.
The locking element fits into the centre of the pulley and makes sure it is secured to the BioDisc shaft.
RCK40-40x65 SHAFT CLAMPING ELEMENT
BD/BE TOP PULLEY FOR BIODISC
TOP PULLEY FOR BD/BE BIODISC SEWAGE TREATMENT PLANT
Top Pulley suitable for the motor shaft of the Klargester BD/BE BioDisc Sewage Treatment Plant
17 Teeth
5/8" Pitch
F7 Tolerence
20mm Wide High Torque Drive Pulley
Bored 20mm
Grubscrew Supplied
British Standard Keyway
BF BIODISC COVER ASSEMBLY
BF BIODISC COVER ASSEMBLY
BF Bottom Pulley for Biodisc
BF Bottom Pulley for Biodisc
The BF BioDisc Bottom Pulley fits the main media shaft on all Klargester BF BioDisc Sewage Treatment Systems.
A BF BioDisc Locking Element is also available separately, to lock the sprocket onto the shaft.
BF-TOP-PULLEY-BIODISC
BF-TOP-PULLEY-BIODISC
The BF top pulley is a standard width top pulley suitable to fit the motor shaft on a Klargester BG BioDisc Sewage Treatment Systems.
The BF top pulley comes with a grubscrew to lock into position
17T 5/8 INCH DUPLEX PINION BORED 25mmF7.
BF/BG Drive End Bearing (45mm)
BF/BG Drive End Bearing (45mm)
The BF/BG Drive End Bearing (45mm) is suitable for all BF/BG Klargester BioDisc sewage treatment plants.
Price includes seals, housing, locking ring and bearing.
See images 3 & 4 for technical data on the bearing.
BF/BG LOCKING ELEMENT
BF Bottom Pulley Locking Element
This locking element can be used both on the BF and the BG sewage treatment systems. It is used to clamp the bottom pulley onto the main shaft.
BF/BG Non Drive End Bearing
BF/BG Non Drive End Bearing
The BF/BG Non Drive End Bearing (45mm) is suitable for all BF/BG Klargester BioDisc sewage treatment plants.
Price includes seals, housing, locking ring and bearing.
See images 3 & 4 for technical data on the bearing.
BG-Bottom-Pulley
BG-Bottom-Pulley
This is the bottom pulley required for Klargester BG sewage treatment systems, connecting to the main shaft.
This requires a BG Pulley locking element
BG-TOP PULLEY-BIO DISC
BG-TOP PULLEY-BIO DISC
The BG top pulley is a standard width top pulley suitable to fit the motor shaft on a Klargester BG BioDisc Sewage Treatment Systems.
The BG top pulley comes with a grubscrew to lock into position
19T 3/4 INCH DUPLEX PINION BORED 30mmF7
Biodisc Adaptor Bracket
Biodisc Adaptor Bracket
This biodisc bracket is manufactured to mount the motor on a B1-B2 Biodisc Sewage Treatment System to convert Panasonic from Stephan motor/gearbox.
Fully Galvanised
6mm mild steel plate
Wieght: 2.79Kg
BIODISC BB ROTOR PACK
BIODISC BB ROTOR PACK
Klargester BB Rotor Pack is a replacement sewage treatment assembly to suit the BB range of Biodisc.
BIODISC MAGNET ONLY - LOSS OF ROTATION
BIODISC MAGNET ONLY - LOSS OF ROTATION
Magnet for Loss of Rotaion Alarm on a BioDisc.
If you need the full kit see below :-
Kingspan Parts Loss of Rotation Kit
BIODISC NYLON BEARING
BIODISC NYLON BEARING
Bearing to suit Klargester BioDisc FA, FB and FC Sewage Treatment Systems.
This bearing has a 25mm internal diameter and a closed off side (as pictured).
For a full set you will need x2,
BIOFICIENT IPS MANIFOLD 6PE
BIOFICIENT IPS MANIFOLD 6PE
Biotec P6-P12 500mm Extension
Biotec P6-P12 500mm Extension
Biotec P6-P12 Sewage treatment extension neck
495mm deep
1875mm diametre
50-50 Spray50% Filled Laminate
Thickness: 7mm
Weight: 33.17 35Kg
Charles Austen ET100-120 Filter
Charles Austen ET100/ET120 Filter
This filter is suitable for use with the Charles Austen ET100 & ET120 Air Pump.
Your inlet filter should be washed out every 6 months and replaced every year. Failing to do so can reduce the pumps flow up to 30% and cause possible overheating.
Note, these can not be returned once opened. Please make sure its the correct kit for your blower.
Coalescer Foam Filter - kf020 - 050
Coalescer Foam Filter - kf020 - 050
Klargester Full Retention Separator Foam Filters - kf020-050
Clean regularly and replace when required this will help with efficiency of the tank
To identify the type of filter you need, information should be on the inside of the neck of the chamber
Delta Clearwater Sewage treatment Lid/Cover (900mm)
*2 Week Lead Time From Point of Order*
Delta Lid Galvanised Frame
Delta Lid Galvanised Frame
Fully Galvanised steel frame to suit Delta Main Cover for sewage treatment systems
Duplex Chain Link (To Suit BD/BE/BF)
DUPLEX CHAIN LINK
To Suit BD/BE/BF DUPLEX DRIVE CHAIN
(Remember to use good qualitiy grease to lubricate the chain when required.)
Duplex Chain Link (To Suit BG)
Duplex Chain Link
To Suit BG DUPLEX DRIVE CHAIN
(Remember to use good quality grease to lubricate the chain when required.)
EBARA BEST FOUR M SUMP PUMP
EBARA BEST FOUR M SUMP PUMP
The Ebara Best Four Manual Submersible pump can be used for various domestic applications including draining wells, garages, cellars or places that are subject to flooding.
It can also be used for movement of seepage water or draining of unfoul wastewater as well as irrigation of gardens.
Technical Details
Equipped with mechanical seal as per standard
Corrosion...
Ebara Best One MS Automatic Sump Drainage Water Pump - Float Switch - 230v
Ebara Best One MS Automatic Sump Drainage Water Pump - Float Switch - 230v
The best one MS submersible electric pump is for clean & dirty water, it can be used in multiple applications including draining, garages, basements, cellars, or any other places that are subject to flooding. Also, it can be used to supply water to garden fountains and be used for easy emptying of large tanks and reservoirs....
Sewage Treatment Plant Accessories FAQs
What is a distribution box on a septic tank?
A distribution box is used to divide the effluent flow from a septic tank into two or more percolation areas.
Is distribution box necessary?
The distribution box is a major part of the septic system being able to function properly is very important. If the distribution box isn't working the right way you will soon be dealing with percolation field failure.
What is the difference between septic tank and distribution box?
The septic system works by sending wastewater from your home through pipes that take it to a septictank. From there, the wastewater goes through more pipes to the distribution box. This distribution box distributes the wastewater evenly through field lines into the percolation area.